Initially, the Logitech G G733 headset did not work on MacBook M1, there was no workaround, sound just did not come from the headset. But now, after the release of macOS Big Sur 11.3, we have finally a workaround that allows G733 to work.
If you have no sound on…
Download, and install Microsoft PowerToys https://github.com/microsoft/PowerToys
Then open it, and in “General” settings, set “Always run as administrator” and “Run at startup.”
Then go to “Keyboard Manager” and set it up the same as in the picture below.
(Remap shortcut is valid in the picture. There is some weird behavior that needs to remap from Ctrl+Tab to Alt+Tab and not opposite as you think it should)
With Ubuntu 20.04 and Gnome 3.36.X, now we have Extension's manager build in, so it’s simple (unlike on older versions) to Disable build-in Ubuntu extensions.
Just open the Extensions application and disable Ubuntu Dock. That is all. You can disable Desktop icons or Ubuntu App Indicators.
This guide only applies to the KDE desktop environment.
In System, Settings navigate to “Hardware — Input Devices” and open “Keyboard” and then “Advanced” tab.
Here look for “Ctrl position” and check “Swap Left Alt with Left Ctrl.” …
If you want to connect your AirPods to Ubuntu 19.10 (Any distro that uses bluez like Fedora, Manjaro, KDE Neon, etc.), it won’t work out of the box. But the solution to this is quick and easy.
We need to edit the Bluetooth configuration file:
sudo nano /etc/bluetooth/main.conf
Look for “#ControllerMode = dual”. It’s at the bottom part of this file. We need to uncomment this line.
Then restart Bluetooth and pair normally:
sudo systemctl restart bluetooth
This guide only applies to Gnome DE.
We need to install Gnome Tweaks for this guide. Gnome Tweaks is all in one tool for customizing Gnome DE, and it’s in Ubuntu official packages.
You can install it by the search for it in the “Ubuntu Software” application or by this…
If you have problems with your VS Code that uses over 100% of CPU on Windows or 30–40% on Linux, I may have a solution for you. The problem causing this is often TSServer. And with small edit in settings, you can get to 1–5% CPU on Large projects as I have. Just go to settings.json and add these lines:
This solution is a little aggressive, but it is going to help a lot, and it’s better than VS Code taking all your CPU power.
Pro většinu našich dat už máme dnes jednoduché cloudové řešení, na hudbu Apple Music a Spotify, na fotografie Apple / Google Photos, na knihy iBook atd. Ale na filmy jsem dlouhou dobu bohužel žádné rozumné řešení nenašel. Ale s příchodem Google Photos neomezeného nahrávání fotek a videí už zde řešení…